Example: Bible, Android

  • PDF
  • DOC
  • XLS
  • RTF
  • TXT
  • PPT

Bhma b02011 PDF results

Section 06402 - interior architectural woodwork

Washington state migrant council head start units section 06402 - interior architectural woodwork part 1 - general 1.1 related documents a. drawings and general provisions of the contract, including general and supplementary conditions and division 1 specification sections, apply to this section. 1.2 summary a. this section includes the following: Back-mounted pulls: bhma a156.9, b02011. d. adjustable shelf standards and supports: bhma a156.9, b04071; with shelf rests, b04081. e.

Ff+e package 1: casegoods specifications ucsd north campus housing ...

Ff+e package 1: casegoods specifications ucsd north campus housing, phase 1 issue date: 3/3/2009 each furniture item scheduled in this specification manual is assigned a "key" code; each key code is cross- referenced on the corresponding furniture location plans. university of california, san diego movable furniture north campus housing... Back-mounted pulls: bhma a156.9, b02011. c. catches: roller catches, bhma a156.9, b03071. d. shelf rests: bhma a156.9, b04013; metal. e.

Ansi/bhma a156.9 - 2003 american national standard for cabinet ...

Catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. included are performance tests covering operational, cyclical, strength, and finish criteria. in addition, definitions, general information, test equipment requirements and test procedures are included. illustrations, type numbers... Ansi/bhma a156.9 - 2003 american national standard for cabinet hardware this standard establishes requirements for cabinet hardware and includes hinges...

Interior architectural woodwork section 06 4023-1

Interior architectural woodwork section 06 4023-1 06-018 part 1 - general 1.1 related documents a. drawings and general provisions of the contract, including general and supplementary conditions and division 01 specification sections, apply to this section. 1.2 summary a. this section includes the following: 1. wood cap for guardrailing... Back-mounted pulls: bhma a156.9, b02011. e. wire pulls: back mounted, solid metal, 4 inches (100 mm) long, 5/16 inch (8 mm) in diameter. f.

A. product data: for each type of process and factory-fabricated ...

Virginia railway express broad run maintenance facility september 22, 2008 miscellaneous rough carpentry 06 10 53-1 section 06 10 53 - miscellaneous rough carpentry part 1 - general 1.01 summary a. this section includes the following: 1. wood framing. 2. wood blocking. 3. plywood backing panels. 4. interior wood trim. 5. other miscellaneous... Back-mounted pulls: bhma a156.9, b02011. d. wire pulls: back mounted, solid metal, 5 inches long, 2-1/2 inches deep, and 5/16 inch in diameter. e.

Section 064023 - interior architectural woodwork

St. mary's hospital 064023 - 1 medical office building 08.056.a - march 16, 2009 bid issue interior architectural woodwork section 064023 - interior architectural woodwork part 1 - general 1.1 related documents a. drawings and general provisions of the contract, including general and supplementary conditions and division 01... B. frameless concealed hinges (european type): bhma a156.9, b01602, 135 degrees of opening, self-closing. c. back-mounted pulls: bhma a156.9, b02011. d.

Ufgs 12 31 00 manufactured metal casework

Usace / navfac / afcesa / nasa ufgs-12 31 00 (may 2009) - preparing activity: nasa superseding ufgs-12 31 00 (january 2008) unified facilities guide specifications references are in agreement with... Ansi/bhma a156.5 (2010) auxiliary locks and associated products ansi/bhma a156.9 (2010) cabinet hardware international code council (icc) icc ipc... b02011...

Virginia railway express crossroads yard maintenance facilities

Virginia railway express crossroads yard maintenance facilities section061053 - miscellaneous rough carpentry part 1 - general 1.1 summary a. this section includes the following: 1. wood framing. 2. wood blocking. 3. plywood backing panels. 1.2 submittals a. product data: for each type of process and factory-fabricated product. 1. include data for... Back-mounted pulls: bhma a156.9, b02011. d. wire pulls: back mounted, solid metal, 5 incheslong, 2-1/2 inches deep, and 5/16 inchin diameter. e.

University of new hampshire

U niversity of n ew h ampshire planning, design and construction guidelines june 7, 2010 chapter 5 - technical construction and renovation standards interior architectural woodwork 06402 - 1 section 06402 - interior architectural woodwork 1.1 summary a. this section includes the following: 1. interior standing and running trim. 2. interior frames... Back-mounted pulls: bhma a156.9, b02011. d. wire pulls: back mounted, stainless steel, 4 inches (100 mm) long, 5/16 inch (8 mm) in diameter. e.

Section 064023 - interior architectural woodwork

Specifications standards for university of washington section 06 40 23 job order contracting 202936 interior architectural woodwork zgf partnership page 1 of 8 january, 2009 section 06 40 23 - interior architectural woodwork part 1 - general 1.1 summary a. this section includes the following: 1. interior frames and jambs. 2. wood veneered cabinets Back-mounted pulls: bhma a156.9, b02011. e. wire pulls: back mounted, solid metal, 4 inches long, 5/16 inch in diameter. f. catches:...

Dsc cosmetology program renovations, building 510

October 2010 dsc cosmetology program renovations, building 510#02092.50 interior architectural woodwork 064023 - 1 section 064023 - interior architectural woodwork part 1 - general 1.1 summary a. this section includes the following: 1. plastic-laminate cabinets. 2. plastic-laminate countertops. 1.2 submittals a. product data: for cabinet hardware... Back-mounted pulls: bhma a156.9, b02011. c. wire pulls: back mounted, solid metal, 4 inches (100 mm) long, 5/16 inch (8 mm) in diameter. d.

D'youville college conformed set new academic building january ...

D'youville college conformed set new academic building january 16, 2009 cannon design project no. 002935.00 interior architectural woodwork 06 4023 - 1 section 06 4023 - interior architectural woodwork part 1 - general 1.1 summary a. this section includes the following: B. wire pulls: back mounted, bhma a156.9, b02011 solid brass, 4 inches (100 mm) long, 5/16 inch (8 mm) in diameter, equivalent to the following: 1.

Section 064023 - interior architectural woodwork

Gi upgrade - 8 east-c wing december 15, 2010 project # 508-10-106 06 40 23 - 1 section 06 40 23 interior architectural woodwork part 1 - general 1.1 description a. this section includes the following: 1. plastic-laminate cabinets. 2. cabinet hardware and accessories. b. interior architectural woodwork includes wood furring, blocking, shims, and... Back-mounted pulls: bhma a156.9, b02011. gi upgrade - 8 east-c wing december 15, 2010 project # 508-10-106 06 40 23 - 4 d. wire pulls: back...

Section 064116 - plastic-laminate-faced architectural cabinets

10-133 plastic -laminate-faced architectural cabinets 064116 - 1 section 064116 - plastic-laminate-faced architectural cabinets part 1 - general 1.1 related documents a. drawings and general provisions of the contract, including general and supplementary conditions and division 01 specification sections, apply to this section. 1.2 summary a. Back-mounted pulls: bhma a156.9, b02011. d. wire pulls: back mounted, solid metal, 5 inches long, 2-1/2 inches deep, and 5/16 inch in diameter. e.

Va 12 31 00 manufactured metal casework

04-11 12 31 00 - 1 section 12 31 00 manufactured metal casework spec writer notes: 1. delete between //// if not applicable to project. 2. delete other item or paragraph not applicable in the section and renumber the paragraphs. 3. verify details are shown on drawings. part 1 - general 1.1 description a. this section specifies metal casework... Ansi/bhma a156.5, similar to e0261, key one side. b. on active leaf use three-point locking device... ansi bhma a156.9. 1. door/drawer pulls: b02011....

Performance bond

Performance bond 00500-1 hiv08373 - highland village service center 00500 performance bond state of texas' county of denton ' know all men by these presents: that, of the city of, county of, and state of, as... Back-mounted pulls: bhma a156.9, b02011. d. wire pulls: back mounted, solid metal, 4 inches (100 mm) long, 5/16 inch (8 mm) in diame-ter. e. catches:...

D'youville college

D'youville college conformed set new academic building january 16, 2009 cannon design project no. 002935.00 interior architectural woodwork 064023-1 section 064023-interior architectural woodwork part 1 -general 1.1 summary a. this section includes the following: 1. interior standing and running trimand framework. 2. plastic-laminate cabinets. 3. Wire pulls: back mounted, bhmaa156.9, b02011 solidbrass, 4 inches (100 mm) long, 5/16 inch (8 mm)... drawer slides: bhma a156.9, b05111; side-mounted...

Section 06402 - interior architectural woodwork

Interior architectural woodwork 06402 - 1 mhsm project 0107.00 cd date 02.01.04 section 06402 - interior architectural woodwork part 1 - general 1.1 summary a. this section includes the following: 1. interior standing and running trim. 2. wood cabinets. 3. plastic-laminate cabinets. 4. wood countertops. 5. plastic-laminate countertops. 6. solid... Back-mounted pulls: bhma a156.9, b02011. e. wire pulls: back mounted, 4 inches (100 mm) long, 5/16 inches (8 mm) in diameter. f. catches:...

Architectural hardware

Generalinformation 1 ©2009rockwoodmanufacturi ngcompany 800-458-2424•www.rockwo odmfg.com introduction since1946rockwoodmanufact uringcompanyhastakenpride initsreputationofpro ducingqualitybuilder'shar dware. ourfocusisonthemanufactur eofdoortrimhardware forthecommercialandreside ntialmarket.althoughmanyi temsinourproductlineare Code bhma code aluminum satin...

Top Queries


Recent Searches

 
DOC-TXT