Example: Bible, Android

  • PDF
  • DOC
  • XLS
  • RTF
  • TXT
  • PPT

Ansi a156.9 PDF results

ansi/bhma a156.9 - 2003 american national standard for cabinet ...

Catches, shelf rests, standards and brackets, drawer slides, rotating shelves and track with guides for sliding panels. included are performance tests covering operational, cyclical, strength, and finish criteria. in addition, definitions, general... ansi/bhma a156.9 - 2003 american national standard for cabinet hardware this standard establishes requirements for cabinet hardware and includes hinges...

Test report for: ansi/bhma a156.9-2010 cabinet hardware test ...

... g100238126grr-001 date: october 28, 2010 page 1 of 5 p.o. no.:262718 test report for: hafele america ansi/bhma a156.9-2010 cabinet hardware test standards moovit double-wall drawer system 4700 broadmoor se, suite 200 kentwood, mi 49512 telephone: 616-656-7401 facsimile: 616-656-2022 www.intertek-etlsemko.com hafele america report...

ansi/bhma a156.5-2001 american national standard for auxiliary ...

... auxiliary bored and mortise locks, rim locks, cylinders and push button mechanisms. part two establishes requirements for indexed key control systems. this standard includes definitions, dimensional characteristics, component designs, illustrations, type numbers, descriptions and tests (including equipment requirements and procedures). tests... ansi/bhma a156.5-2001 american national standard for auxiliary locks and associated products the first part of standard ansi/bhma a156.5-2001...

Cabinet/closet hardware

Miscellaneous 430(pl-42) zipf lock company see page 427 for cal royal, don jo, ives finish descriptions. cabinet/closet hardware stock no. (specify finish) iv-22b finishes: 3, 10b, 15, 15a, 26, 26d stock no. (specify finish) iv-221b finishes: 3, 5, 10b, 15, 15a, 26, 26d flush pull•ideal for use on sliding doors.•built-in prong design... •conforms to design requirements of ansi/bhma a156.9 b22201 and a156.14 d2781. •dimensions: 3-9/16" h x 1-5/16" w x 1/2" d stock no. (specify finish)...

Appendix

Appendix page 2 of 49 353 manual of millwork request form the most recent 11th edition manual of millwork is dated may 1, 2003. bids submitted from this date forward shall be in accordance with the 2003 manual. the manual of millwork is offered in either a printed or electronic version "cdman03," free of charge to all registered architects... ... file drawers [,,@,,] 100 lbs •lateral file drawers wider than 24" [,,@,,] 150 lbs keyboard trays shall conform to section 4.13 (test 12, drawers and trays) of ansi/bhma a156.9.

An overview of the ansi/bhma a156

... hardware manufacturers association. the standard addresses swinging, sliding, and folding power operated pedestrian doors which open automatically when approached by users or by a knowing act. the standard contains provisions, including performance tests and dimensional requirements, that are intended to reduce the chance of injury to users. An overview of the ansi/bhma a156.10 standard what is ansi/bhma a156.10? the ansi/bhma 156.10 standard for power operated pedestrian doors, was...

Va 06 20 00 finish carpentry

05-10 06 20 00 - 1 section 06 20 00 finish carpentry spec writer notes: 1. delete between //// if not applicable to project. also delete any other item or paragraph not applicable in the section and renumber the paragraphs. 2. use terminology as listed and coordinate drawings to use the same term. 3. this section includes custom fabricated Install vertical slotted shelf standards, ansi a156.9, b04103 to studs with toggle bolts through each fastener opening. double slotted shelf standards may be used...

Unified facilities guide specifications

Usace / navfac / afcesa / nasa ufgs-12 31 00 (may 2009) -preparing activity: nasa superseding ufgs-12 31 00 (january 2008) unified facilities guide specifications references are in agreement with... ansi/bhma a156.5 (2010) auxiliary locks and associated products ansi/bhma a156.9 (2010) cabinet hardware international code council (icc) icc ipc...

Approved cabinet hardware listings applicable to the manual of ...

The institute has adopted ansi / bhma standards, grade 2, as its basic minimum requirement. woodwork institute / approved product listing 01-10 note: click here for general information and disclaimer approved cabinet hardware listings applicable to the manual of millwork the institute has adopted ansi / bhma standards, grade 2, as its basic... ... applicable to the manual of millwork the institute has adopted ansi / bhma standards... shall*conform*to*section* 4.13* (test*12,*drawers*and*tra ys)*of*ansi/bhma**a156.9.

Roller latches

G1 model: 30 32 roller type: blank standard nylon roller f nylon coated brass roller strike type: blank standard strike a asa strike finishes: rl30 us3, us4, us10, us10b, us26, us26d rl32 us3, us4, us10, us10b, us32, us32d roller latches rl30•actuation is simple, closing of the door causes the roller to fall in the depression of the strike... •meets ansi/bhma a156.9. •finish: us26d. cl21a •four-way catch with plate type strike. •ideal for closet doors, access doors, hinged openings and numerous other...

American national standards

... national standards, including the national adoption of iso and iec standards as american national standards, and on proposals to revise, reaffirm or withdraw approval of existing american national standards. a draft standard is listed in this section under the ansi-accredited standards developer (asd) that sponsors it and from whom a copy may... Published weekly by the american national standards institute 25 west 43rd street, ny, ny 10036 this section solicits public comments on...

01 0774 & 0776 cover 1

Section 12300 educational casework conditions of the contract and division 1, as applicable, apply to this section. part 1 - general 1.1 section includes a. manufactured plastic laminated casework, hardware and related accessories. 1.2 related work a. section 06100 - rough carpentry: wood blocking in walls for support of... All hardware shall meet ansi a156.9 and shall be subject to approval by the architect. all keying shall be best access systems inc. small format...

Cabinet/closet knobs and pulls

K1 cabinet/closet knobs and pulls 513 knob backplate •for use with ives cabinet knobs 521, 523, 524, 530 and 535. • available in two diameters: 1-1/2" and 1-3/4". • provides a finishing touch. especially useful to cover holes or marks in replacement or remodeling applications. • made from wrought brass. • conforms to ansi/bhma a156.9 b22131 for brass, b42131 for aluminum. • finishes: b3, b4, b5, b10, b10b, b14, b15, b15a, b26, b26d. 1", 1 1/4" and 1...

Letter box plates weather tite®-

Miscellaneous 444(pl-42) zipf lock company see page 427 for cal royal, don jo, ives finish descriptions. letter box plates weather tite®- magazine size letter box plate with covered back plate•spring-loaded front plate.•dimensions: overall size: 13" x 3-9/16" plate opening: 11" x 2" letter box plate with covered back plate•spring-loaded... •conforms to ansi/bhma a156.9 b43161. •dimensions: case: 3-1/8" long x 1" deep x 9/16" thick load capacity: 9 lbs. super-mite heavy duty magnetic catch...

Yale commercial locks

Builders hardware manufacturers association 355 lexington avenue, 15th floor, new york, ny 10017-6603 tel: 212-297-2122 fax: 212-370-9047 www.buildershardware.com foreword bhma certification program was developed as a means for producers of builders hardware to indicate compliance with american national standards sponsored by bhma. participating Page # revision date ansi/bhma a156.4 door control-closers general information 117... dorma architectural hardware 196 • sargent manufacturing company 198 ansi/bhma a156.9...

206 series folding l-brackets

Applications heavy-duty storage and work surface applications where limitations and/or fl exibility in space is critical(retail/grocery stores, warehouses, industrial, garages, maintenance storage, offi ce/residential storage). load rating: 12" brackets: up to 750 lbs./pair* 16" brackets: up to 880 lbs./pair* mounting: wall material: cold... Results were obtained by laboratory testing in accordance with ansi/ bhma a156.9-2003 performance standard. (load ratings based on brackets being...

16740

Section 06402 interior architectural woodwork part 1 - general 1.01 related documents a. drawings and general provisions of contract, including general and supplementary conditions and division 1 specification sections, apply to this section. 1.02 summary a. this section includes the following: Complies with product class requirements of ansi/bhma a156.9. 2.05 architectural cabinet tops (countertops) a quality standard: comply...

541-350 louis stokes vamc cleveland amendment #1 - , including ...

541-350 louis stokes vamc cleveland amendment #1 finish carpentry 06 20 00 - 1 section 06 20 00 finish carpentry part 1 - general 1.1 description a. this section specifies exterior and interior millwork. b. items specified. - counter shelf - counter or work tops - mounting strips, shelves, and rods Install vertical slotted shelf standards, ansi a156.9, b04103 to studs with toggle bolts through each fastener opening. double slotted shelf standards may be used...

Csi women's mental health center batavia veteran's affairs ...

Csi women's mental health center batavia veteran's affairs medical center batavia, new york va contract no. va528-p-0725 cannon design project no. 003375.00 06 20 00 - 1 section 06 20 00 interior finish carpentry part 1 - general 1.1 description a. this section specifies interior millwork. Cabinet hardware: ansi a156.9. a. door/drawer pulls: b02011. door in seismic zones: b03182. 1) basis-of-design product: subject to compliance with the

Any companies and/or products referred to herein are marks or ...

Door version (e07121 - lock type designation) w drawer version (e07041 - lock type designation) w grade 1 cycle test minimum requirements: 40,000 w grade 1 bolt strength load requirements: 500 lbf door version (e07122 - lock type designation) w drawer version (e07042 - lock type designation) w Rigorous testing an independent lab/testing facility must perform follow up tests prescribed by the product standard, for cabinet locks, the standard is ansi/bhma...

Top Queries


Recent Searches

 
DOC-TXT